

Frame
- 12 feet length x 7 feet height x 1 inch width
- 14-gauge galvanized steel
- Powder coated paint finish
- Bars are evenly spaced 2 inches apart
- Bars are fully welded inside frame
- Each stall panel has 4 places for hanging feed, water buckets, and other horse stall accessories.
- 2, 3 and 4 prong connector pins connect frames to each other
- Horse Stall Fronts = 130lbs
- Horse Stall Sides (vinyl on bottom, bars on top) = 110lbs
- Horse Stall Backs (full vinyl) = 95lbs
Door
- Swinging door (straight bar design) which is centered
- Stall door hinges are fully welded and require no additional assembly
- Stall door latch is fully welded to the frame
- Stall door can be locked with a standard double end snap
- Additional pin lock on the bottom of the door
Vinyl
- 1400gsm vinyl coated nylon webbing
- 2 pieces of vinyl - outside and inside the horse stall
- 2-inch-thick nylon sewn onto the edges and screwed into the steel frame
- Round head screws and washers every 8 inches
- 5 layers of industrial strength foam between the vinyl