$265.00
| /
Recommended by 98% Clients
Installation Hardware Included
Quick Installation in 15 Minutes
Our Half-Sized Stall Gates are perfect for any horse stall in a horse barn. They feature a European Yoke Opening, an attractive mesh bottom, and exceptionally strong steel. Our Stall Gates with Yokes are particularly great for smaller horse breeds – including ponies, miniature horses, and shetlands. Rest assured, our Stall Gates are the strongest, safest, and most elegant stall doors in the equine industry.
Frame: | 15-GA steel |
Bars: | 16-GA steel |
Mesh: | 3-GA steel |
Steel Treatment: | Pre-galvanized steel |
Weld Treatment: | Zinc-rich primer on all welds |
Finish: | Black powder coat finish |
Width: | 51″ W |
Height: | 42″ H |
Yoke Style: | European Yoke |
Weight: | 51.02 lbs. |
Yes, absolutely! We are located in Northern Virginia, but our clients are all across North America including United States, Canada, and Mexico. Our team will help you coordinate the best shipping method for your horse stall equipment.
Compared to other Stall Gates on the market, our Stall Gates tend to be “heavy.” This is because we build our Stall Gates to be extremely heavy-duty. We use strong steel tubing and mesh for each component to ensure it holds up to the rigors of your barn.
Our Stall Gates’ yoke is 16.75” deep from the top most point to the bottom center of the stall door’s yoke.
The only difference between the two Stall Gates is the dimensions. Our Full-Sized Stall Gates are 65” tall while our Half-Sized Stall Gates are 42” tall. Our Half-Sized Stall Gates are a fantastic door option for smaller horse breeds such as thoroughbreds, polo ponies, shetlands, and miniature horses.
Our Stall Gates are exceptionally quick and easy to install. We pre-drill holes on one-side of each stall gate. We also place our logo on both sides of each stall door. This allows you to flip the stall gate to accordingly install as you need. We also provide all of the necessary installation hardware including hinges, bolts, screws, a screw eye, carabiner clip, and gate chain. Most clients are able to install our stall gates without a general contractor. Each gate usually takes no more than 15 minutes to install.
Our Stall Gates are 51” wide, but our clients install into smaller door openings all the time. We have seen our clients successfully and safely install our Stall Gates into openings ranging from 43” wide to 52” wide. If you have an existing sliding stall door, we would recommend to mount our Stall Gates on the stall’s interior to swing into the stall. If you have flexibility, you can then mount our Stall Gates on either the horse stall’s exterior or interior.
We always recommend to leave at least 1” between the Stall Gate’s bottom frame and your floor. This will ensure enough clearance for your Stall Gate to seamlessly operate. If you install the Stall Gate flush into a door opening, we then recommend roughly an additional 1-1/2” between the door frame and your wood post.